joi, 6 august 2009

UTA 0-0 Feyenord Rotterdam

14:00
Ce poate fi mai dificil decât atunci când sorţii îţi hărăzesc ca adversar, încă din primul tur, tocmai pe deţinătoarea en-titre a Cupei Campionilor Europeni, care cu o săptămână înaintea primei manşe îşi îmbogăţise palmaresul cu încă un trofeu preţios, Cupa Intercontinentală! Aşadar, campioana României din ediţia 1969/70, UTA, urma să dea piept cu formaţia care câştigase în acel an finala C1 în faţa lui Celtic(!), iar apoi i-a înfrânt şi pe argentinienii de la Estudiantes la Plata! În speţă echipa ce domina pe atunci fotbalul european intercluburi, Feyenoord. Antrenată de austriacul Ernst Happel, trupa din „Ţara Lalelelor” avea jucători de mare calibru, precum van Hanegem, Moulijn, Israel, van Duivenbode, Hasil sau Kindvall. Ce mai puteau să spere arădenii în aceste condiţii? Decât să nu piardă la scoruri „astronomice”, gândindu-se că, oricum, vor pica de pe un „cal frumos”.

Şi totuşi, în seara de 16 septembrie 1970, la Rotterdam, în faţa a peste 60 000 de spectatori, „Bătrâna Doamnă” a reuşit un rezultat neverosimil, 1-1, în faţa celor de la Feyenoord! Atacantul Florian Dumitrescu a deschis scorul în minutul 14, trimiţând cu capul în plasă, la o centrare a lui Axente, pentru ca gazdele să egaleze zece minute mai târziu, prin W. Jansen. După acest prim joc, principalul arădenilor, regretatul Nicolae „Coco” Dumitrescu, declara: „ De când sunt antrenor, niciodată nu mi s-au realizat, aşa cum am gândit, planurile tactice ca în acest joc!”. Iată ce a povestit fostul mare internaţional al alb-roşiilor, Flavius Domide: „Practic, noi ne-am pregătit să nu primim mai mult de două goluri. Tocmai de aceea am jucat câteva meciuri cu formaţii tari. Succesul echipei a constat în unitatea deosebită dintre cei 12-13 jucători, tactică excelentă a antrenorilor, dar şi forma de zile mari a portarului Gornea. De fapt, ne-am autodepăşit cu toţii!”.

Şi a urmat meciul retur, pe 30 septembrie, la Arad. Cei de la Feyenoord, care consideraseră rezultatul din tur un simplu accident pentru ei, au venit convinşi că se vor califica, chiar antrenorul Happel susţinând că „doar dacă se va întâmpla o minune vom fi eliminaţi. Dar aşa ceva nu se va întâmpla”. Ei bine, cea de-a opta minune a lumii(aşa cum era redată în presă calificarea arădenilor) s-a întâmplat. Susţinută frenetic de aproximativ 20 000 de spectatori, UTA a făcut faţă cu brio atacurilor în valuri ale vizitatorilor, terminând meciul nedecis, 0-0, scor care le-a conferit calificarea!


Eroii meciului au fost următorii (cu notele acordate de trimisul revistei “Fotbal”): Gornea 10, Biró 8, Poszonyi 10, Leretter 10, Brosovszky 9 – Petescu 9, Domide 8, Kalinin 6 (Sima 7), Axente 8, Otto Dembrovschi 7, Florian Dumitrescu 9. Aradul a fost în sărbătoare după acest meci. La hotelul “Astoria” unde erau cazaţi olandezii “Happel, Happel, ha, ha, ha” a fost lozinca cea mai scandată.


De ce scriu azi despre ce s-a întâmplat acum aproape 40 de ani? Pentru că aseară am trait pe stadion miracolul pe care mi-l povesteau oamenii mai în vârstă. Am fost pe stadion să urmăresc returul celor de la FC Timişoara (da! rivalii echipei mele favorite) cu cei de la Shaktar Doneţk. Am retrăit cam aceleaşi emoţii şi bucurii pe care le-au trăit şi în urmă cu 40 de ani arădenii. Cică istoria nu se repetă. Culmea, a zis-o până şi Lucescu, proaspăt desemnat antrenor emerit şi a primit titlul Steaua României. Ce ironie a soartei, Timişoara să imite performanţa cu care se laudau rivalii de la UTA! Ce paradoxuri ne oferă fotbalul! Dar ce frumos e... Citiţi cronica de mai sus şi citiţi ziarele (online) de azi, parcă sunt trase la indigo. Diferă doar numele actorilor.

marți, 28 iulie 2009

miercuri, 8 iulie 2009

Install Windows XP on the Asus Eee PC

13:37
Installing Windows XP on the Asus EEE pc using a single USB flash drive.Please note this tutorial works on all computers not just the Asus EEE PC.

To complete this tutorial you need a 32bit version of Windows XP or Windows Vista installed on your home PC.

What you'll need:

USB_PREP8 (alternative download)

PeToUSB (alternative download)

Bootsect.exe (alternative download)

Special Note: If you use the program Nlite be sure to keep the manual installation files as the USB_prep8 script relies on these files.

Extract the files in Bootsect.zipThe next step is to extract USB_prep8 and PeToUSB.Next copy the PeToUSB executable into the USB_prep8 folder.Inside of the USB_prep8 folder double click the executable named usb_prep8.cmd.

The window that opens will look like this:

Press any key to continue

You next window will look like this:

These settings are preconfigured for you all you need to do now is click start.
Once the format is complete DO NOT close the window just leave everything as it is and open a command prompt from your start menu (type cmd in the search bar or run box depending on your version of windows.).

Inside of the command windows go to the directory you have bootsect.exe saved.
(use the cd directoryname command to switch folders)

Now type "bootsect.exe /nt52 R:" NOTE R: is the drive letter for my USB stick if yours is different you need to change it accordingly. What this part does is write the correct boot sector to your USB stick, this allows your PC to boot from the USB stick without it nothing works.
Please note: When running the bootsect.exe command you cannot have any windows open displaying the content of your USB stick, if you have a window open bootsect.exe will be unable to lock the drive and write the bootsector correctly.

If all went well you should see "Bootcode was successfully updated on all targeted volumes."

Now you can close this command prompt (don't close the usbprep8 one by mistake) and the petousb window.

You window you see now should look like this:


If it doesn't try pressing enter.

Now you need to enter the correct information for numbers 1-3.
Press 1 and then enter. A folder browse window will open for you to browse to the location of you XP setup files (aka your cdrom drive with xp cd in)
Press 2 and enter a letter not currently assigned to a drive on your PC
Press 3 and enter the drive letter of your USB stick
Press 4 to start the process.

The script will ask you if its ok to format drive T:. This is just a temp drive the program creates to cache the windows installation files. Press Y then enter.

Once it's done formating press enter to continue again, you can now see the program copying files to the temp drive it created. Once this is done press enter to continue again.

Next you will see a box pop up asking you to copy the files to USB drive yes/no you want to click yes.

Once the script has completed copy files a popup window asking if you would like to USB drive to be preferred boot drive U: select YES on this window.

Now select yes to unmount the virtual drive.

Ok we are done the hard part, close the usbprep8 window.

Now make sure your EEE pc is configured with USB as the primary boot device.
Insert your USB drive and boot up the EEE.

On the startup menu you have two options, select option number 2 for text mode setup.

From this point on it is just like any other windows XP installation delete/recreate the primary partition on your EEE pc and format it using NTFS. Make sure you delete ALL partitions and recreate a single partition or you will get the hal.dll error message.

Once the text mode portion of setup is complete it will boot into the GUI mode (you can press enter after the reboot if your too excited to wait the 30 seconds)

Once the GUI portion of setup is complete you will again have to boot into GUI mode this will complete the XP installation and you will end up at you XP desktop. It is very important that you DO NOT REMOVE THE USB STICK before this point. Once you can see your start menu it is safe to remove the usb stick and reboot your pc to make sure everything worked.

This method has advantages over all current no cdrom methods of installing XP to the EEE. You do not have to copy setup files in DOS to the SSD and install from there. It gives you access to the recovery console by booting into text mode setup, and it gives you the ability to run repair installations of XP if you have problems later on.

I hope this worked out for you and please post feedback to the comments section.
Please note due to the amount of comments this article has received you must now click on "Post a Comment" below the existing comments to view the most recent feedback in a popup window.

vineri, 26 iunie 2009

Scriere imagine ISO în Linux

11:14
În primul rând trebuie să vedem ce adresă şi ce nume are inscriptorul de CD/DVD. Pentru aceasta scanam cu opţiunea ''scanbus''. Această opţiune se utilizează pentru a decta ce adresă SCSI are CD/DVD Recorder-ul în sistem:
# cdrecord -scanbus
Va rezulta ceva de genul:
Cdrecord-Clone 2.01a34 (i686-pc-linux-gnu)
Copyright (C) 1995-2004 Jrg Schilling
scsidev: 'ATA:'
devname: 'ATA'
scsibus: -1 target: -1 lun: -1
Warning: Using badly designed ATAPI via /dev/hd*
interface.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
scsibus1:
1,0,0 100) 'SONY' 'CD-Writer' '1.0g'
1,1,0 101) *
1,2,0 102) *
1,3,0 103) *
1,4,0 104) *
1,5,0 105) *
1,6,0 106) *
1.7.0 107) *
În exemplul de mai sus device-ul meu are numele 1,0,0. Acum vom da comanda de scriere:
# cdrecord -v -dao dev=1,0,0 file.iso

De asemenea se poate seta viteza de scriere:
# cdrecord -v -dao dev=1,0,0 speed=8 file.iso

marți, 16 iunie 2009

About Us

Recent

recentposts

Random

randomposts